There are basically four types of CE system projectiles and the decision as to which is used is made based on the state of contamination and the configuration of the hoses, pipes or tubes.
(1)Standard S
| 19 types from 7 mm to 60 mm for hoses pipes and tubes with clips are available
Go to list
|
 |
(2)Coupling C
| 19 types from 7 mm to 60 mm for hoses pipes and tubes with clips are available
Go to list
|
 |
(3)Abrasive A
| For hoses, pipes and tubes in which contaminants have begun to collect.
19 types from 7 mm to 60 mm are available
Go to list
|
 |
(4)Grinding GR
| For hoses pipes and tubes in which contaminants have stuck to the inner walls
19 types from 7 mm to 60 mm are available
Go to list |
 |
How to Use Projectiles
| 1. |
A projectile with an inner diameter that is 20% larger than that of normal tubes should be passed through. For example, contaminants can be removed by passing a 40mm projectile through a tube with an inner diameter of 32mm. |
| 2. |
Standard S is normally used, and in the case where a coupling is attached the coupling projectile C is used, and for metal pipes etc, abrasive A or grinding G is used depending on the level of contamination. |
| 3. |
If the level of contamination is high, first pass the coupling projectile through as this passes through easily, then pass through the standard projectile. |
| 4. |
Always pass the projectile through from both ends alternately. |
| 5. |
If the projectile gets stuck inside, apply air pressure from the opposite side using a launcher and it will come back out easily. |
CE System - Projectile Type and Price List
These prices do not include consumption tax and shipping.
| Number in 1 bag |
Standard
type S |
Catalog Price |
Coupling
type C |
Catalog Price |
| 100 |
S-07 |
2,670 |
C-07 |
2,280 |
| 100 |
S-10 |
2,850 |
C-10 |
2,540 |
| 100 |
S-12 |
3,050 |
C-12 |
2,690 |
| 100 |
S-14 |
3,220 |
C-14 |
2,800 |
| 100 |
S-16 |
3,550 |
C-16 |
3,330 |
| 100 |
S-18 |
3,900 |
C-18 |
3,560 |
| 100 |
S-20 |
4,560 |
C-20 |
4,060 |
| 100 |
S-22 |
5,130 |
C-22 |
4,680 |
| 50 |
S-24 |
3,460 |
C-24 |
2,960 |
| 50 |
S-26 |
4,430 |
C-26 |
4,020 |
| 40 |
S-28 |
4,940 |
C-28 |
4,200 |
| 40 |
S-30 |
5,350 |
C-30 |
4,430 |
| 40 |
S-33 |
6,800 |
C-33 |
4,830 |
| 30 |
S-36 |
5,900 |
C-36 |
4,900 |
| 30 |
S-40 |
6,300 |
C-40 |
5,500 |
| 20 |
S-45 |
5,680 |
C-45 |
5,240 |
| 20 |
S-50 |
6,750 |
C-50 |
6,380 |
| 15 |
S-55 |
7,160 |
C-55 |
6,270 |
| 15 |
S-60 |
9,200 |
C-60 |
8,430 |
| |
| Number in 1 bag |
Abrasive
type A
|
Catalog Price |
Grinding
type GR |
Catalog Price |
| 100 |
A-07 |
3,660 |
GR-07 |
7,500 |
| 100 |
A-10 |
4,090 |
GR-10 |
9,500 |
| 100 |
A-12 |
4,330 |
GR-12 |
9,500 |
| 100 |
A-14 |
4,510 |
GR-14 |
10,000 |
| 100 |
A-16 |
5,350 |
GR-16 |
10,000 |
| 100 |
A-18 |
5,740 |
GR-18 |
11,000 |
| 100 |
A-20 |
6,690 |
GR-20 |
14,000 |
| 100 |
A-22 |
8,000 |
GR-22 |
15,000 |
| 50 |
A-24 |
5,040 |
GR-24 |
9,000 |
| 50 |
A-26 |
6,460 |
GR-26 |
11,000 |
| 40 |
A-28 |
7,000 |
GR-28 |
11,000 |
| 40 |
A-30 |
7,450 |
GR-30 |
14,000 |
| 40 |
A-33 |
7,890 |
GR-33 |
15,000 |
| 30 |
A-36 |
8,160 |
GR-36 |
15,000 |
| 30 |
A-40 |
9,170 |
GR-40 |
15,000 |
| 20 |
A-45 |
8,540 |
GR-45 |
15,000 |
| 20 |
A-50 |
10,870 |
GR-50 |
17,000 |
| 15 |
A-55 |
10,950 |
GR-55 |
17,000 |
| 15 |
A-60 |
14,560 |
GR-60 |
21,000 |
|
